MILA PROSECURE SECURITY LEVER/LEVER DOOR HANDLE - 92PZ - 122mm CENTRE

£30.00

More Details about the DS163 Mila Prosecure Security uPVC Door Handles


This handle set will only fit certain locks on uPVC doors so take care to examine the diagram for the positions of the screws, keyhole and levers. Most notably the size between the screw centres must be 122mm, the lever to lock size is 92mm. If you currently have a standard handle then when you receive this set of upvc door handles the first thing you will notice is how chunky and heavy the outer backplate is. This is a really well designed handle set with the primary focus of keeping burglars at bay. To fit this handle you will have to open up the two clearance holes through the upvc door to the sizes on the diagram. This is easily done as it is uPVC. The screws are slightly thicker than the conventional ones but will pass through the door and lockcase easily enough if not with a slight transition. With the correct spindle length and screws chosen from the pack supplied you can have this handle fitted in minutes.


If you want more help with measuring and installing upvc door handles generally then follow the links here for How To Measure uPVC Door Handles and How to Install uPVC Door Handles.


More about the specification of the DS163 Security Door Handle


Mila have successfully achieved the security test standard which was independently tested at Exova and meets PAS 024:2016 and TS007:2014 and A1:2015. This handle also meets the Police Preferred Specification - Secured By Design.

If someone is going to gain entry through your door they are very likely to attack the cylinder lock and the handle area. With standard upvc door handles it is very easy to remove the backplate from the door in a matter of seconds with a bit of brute force. This is usually done using mole grips or similar handy tools. Once the handle is off the door then the cylinder is exposed to attack and it's no surprise to know that any standard cylinder without anti-snap technology will be broken down in seconds in many cases.


This security upvc door handle is designed to resist the following:

Mole grip attacks - a chamfered edge around the backplate which means mole grips can't get any 'bite' or grip.

Drilling attacks - the cylinder is hidden behind a rotatable disc that will spin as soon as you start drilling. Sufficient hardened casing ensures this is next to impossible to drill.

Lock snapping attacks - an integrated cylinder guard encases the front of the cylinder so no need to use anti snap locks. They simply can't get to the cylinder. This security upvc door handle has a 2 star Kitemark accreditation from BSI which means it is tested against lock snapping. You can achive the full 3 star security by using a 1 star euro cylinder and this would be good advice to change the lock at the same time as the handle. The one star euro lock means it cannot be 'bumped' and this further enhances the security of your door.

Jemmy attacks - special steel reinforcement is designed into the outer backplate to resist lever and jemmy type attacks.


Colour:
Quantity:
Add To Cart

More Details about the DS163 Mila Prosecure Security uPVC Door Handles


This handle set will only fit certain locks on uPVC doors so take care to examine the diagram for the positions of the screws, keyhole and levers. Most notably the size between the screw centres must be 122mm, the lever to lock size is 92mm. If you currently have a standard handle then when you receive this set of upvc door handles the first thing you will notice is how chunky and heavy the outer backplate is. This is a really well designed handle set with the primary focus of keeping burglars at bay. To fit this handle you will have to open up the two clearance holes through the upvc door to the sizes on the diagram. This is easily done as it is uPVC. The screws are slightly thicker than the conventional ones but will pass through the door and lockcase easily enough if not with a slight transition. With the correct spindle length and screws chosen from the pack supplied you can have this handle fitted in minutes.


If you want more help with measuring and installing upvc door handles generally then follow the links here for How To Measure uPVC Door Handles and How to Install uPVC Door Handles.


More about the specification of the DS163 Security Door Handle


Mila have successfully achieved the security test standard which was independently tested at Exova and meets PAS 024:2016 and TS007:2014 and A1:2015. This handle also meets the Police Preferred Specification - Secured By Design.

If someone is going to gain entry through your door they are very likely to attack the cylinder lock and the handle area. With standard upvc door handles it is very easy to remove the backplate from the door in a matter of seconds with a bit of brute force. This is usually done using mole grips or similar handy tools. Once the handle is off the door then the cylinder is exposed to attack and it's no surprise to know that any standard cylinder without anti-snap technology will be broken down in seconds in many cases.


This security upvc door handle is designed to resist the following:

Mole grip attacks - a chamfered edge around the backplate which means mole grips can't get any 'bite' or grip.

Drilling attacks - the cylinder is hidden behind a rotatable disc that will spin as soon as you start drilling. Sufficient hardened casing ensures this is next to impossible to drill.

Lock snapping attacks - an integrated cylinder guard encases the front of the cylinder so no need to use anti snap locks. They simply can't get to the cylinder. This security upvc door handle has a 2 star Kitemark accreditation from BSI which means it is tested against lock snapping. You can achive the full 3 star security by using a 1 star euro cylinder and this would be good advice to change the lock at the same time as the handle. The one star euro lock means it cannot be 'bumped' and this further enhances the security of your door.

Jemmy attacks - special steel reinforcement is designed into the outer backplate to resist lever and jemmy type attacks.


More Details about the DS163 Mila Prosecure Security uPVC Door Handles


This handle set will only fit certain locks on uPVC doors so take care to examine the diagram for the positions of the screws, keyhole and levers. Most notably the size between the screw centres must be 122mm, the lever to lock size is 92mm. If you currently have a standard handle then when you receive this set of upvc door handles the first thing you will notice is how chunky and heavy the outer backplate is. This is a really well designed handle set with the primary focus of keeping burglars at bay. To fit this handle you will have to open up the two clearance holes through the upvc door to the sizes on the diagram. This is easily done as it is uPVC. The screws are slightly thicker than the conventional ones but will pass through the door and lockcase easily enough if not with a slight transition. With the correct spindle length and screws chosen from the pack supplied you can have this handle fitted in minutes.


If you want more help with measuring and installing upvc door handles generally then follow the links here for How To Measure uPVC Door Handles and How to Install uPVC Door Handles.


More about the specification of the DS163 Security Door Handle


Mila have successfully achieved the security test standard which was independently tested at Exova and meets PAS 024:2016 and TS007:2014 and A1:2015. This handle also meets the Police Preferred Specification - Secured By Design.

If someone is going to gain entry through your door they are very likely to attack the cylinder lock and the handle area. With standard upvc door handles it is very easy to remove the backplate from the door in a matter of seconds with a bit of brute force. This is usually done using mole grips or similar handy tools. Once the handle is off the door then the cylinder is exposed to attack and it's no surprise to know that any standard cylinder without anti-snap technology will be broken down in seconds in many cases.


This security upvc door handle is designed to resist the following:

Mole grip attacks - a chamfered edge around the backplate which means mole grips can't get any 'bite' or grip.

Drilling attacks - the cylinder is hidden behind a rotatable disc that will spin as soon as you start drilling. Sufficient hardened casing ensures this is next to impossible to drill.

Lock snapping attacks - an integrated cylinder guard encases the front of the cylinder so no need to use anti snap locks. They simply can't get to the cylinder. This security upvc door handle has a 2 star Kitemark accreditation from BSI which means it is tested against lock snapping. You can achive the full 3 star security by using a 1 star euro cylinder and this would be good advice to change the lock at the same time as the handle. The one star euro lock means it cannot be 'bumped' and this further enhances the security of your door.

Jemmy attacks - special steel reinforcement is designed into the outer backplate to resist lever and jemmy type attacks.


PLEASE NOTE: BOTH HANDLES ARE OLD STOCK AND MAY HAVE MINOR SCRATCHES